Model 4001 ECL Logic Probe
The Model 4001, an active scope probe, has been designed for convenient
monitoring of complementary ECL signals. The 1.5M long 100 Ohm twisted-pair
input cable is equipped with a female bipolar connector which matches standard
single twisted-pair connectors as well as multipin connectors for the flat
cables of the LeCroy ECLine Series of CAMAC modules.
The differential input stage has a common mode range of more than 10
V when operated with a -15 V power supply. The complementary input signal
is translated into a negative single-ended logic signal which can be viewed
on an oscilloscope via a BNC female output connector.
Up
to a higher level directory |
| For
more information