1410 STANDARD
The 1410 meets or exceeds the Specifications for a Typical CAMAC
Supply, latest issue, by the U.S. Mechanical and Power Supply Working
Group. The design features individual regulator boards for each of
the standard outputs, modular construction for ease of maintenance,
front intake blower system and push button metering of all output
voltages and currents.
Standard outputs include positive and negative 6V @ 25 amp shared and
positive and negative 24V @ 6 amp shared.
1510 FOR OPTIONS
The 1510 power supply provides all the standard outputs of the
1410 and a large number of the mechanical and electrical options
required by CAMAC users.
Wiring and circuitry is provided in the basic chassis to facilitate
substitution of standard single function cards with multifunction
cards for +/-12 outputs shared with the +/-24. Also provided is the
circuitry for increasing the +6 volt output to 42 amps.
INPUT: 117 VAC % 60HZ +/-3HZ
OUTPUTS:300 WATTS DC POWER
+6V @ 25A MAX Current shared
-6V @ 25A MAX to 150 Watts
+24V @ 6A MAX Current shared
-24V @ 6A MAX to 150 Watts
REGULATION, LINE AND LOAD:
6V +/- 0.5% DURING 24 HR
24V + 0.2% PERIOD
STABILITY:
6V +/- 0.5% CONSTANT CONDITIONS
24V +/- 0.3% 6 MO. PERIOD
NOISE & RIPPLE: 15MV P-P MAX
TEMP. RANGE: 0 C to 50 C
TEMP COEFF.: 0.02%/'C MAX
VOLTAGE ADJ.: 2%MIN.
TRANSIENT RECOVERY: Typ 50 uSEC.
REMOTE SENSING: STANDARD OUTPUTS
FUSES: ALL REGULATORS
OVERLOAD PROTECTION: FOLD BACK
CURRENT LIMITING ALL OUTPUTS.
CROWBAR: -/+6V 7.5V MAX
+/- 24V 34V MAX
*NOTE: POWER SUPPLIES MEET OR
EXCEED ABOVE SPECIFICATIONS.
OPTIONS: MODEL 1510
+/-12VDC @ 3A OR 6A DERIVED AND
CURRENT SHARED WITH THE +/-24
VDC OUTPUTS
+6V OUTPUT MAY BE INCREASED TO
42 AMP.
CHASSIS SLIDES ARE AVAILABLE AS
AN OPTION FOR BOTH 1410 AND 1510
MODELS.